commit aa47a7034fd4ebd8f82ac707202396d2dadcbb35
parent ae30c851cbb42710893071856699cd3eb27dc72e
Author: jacobs-github <JacobDoesLinux@protonmail.com>
Date: Mon, 10 Feb 2020 13:24:00 -0800
initial mpv commit (only changes from default are vim seeking keys)
Diffstat:
2 files changed, 312 insertions(+), 0 deletions(-)
diff --git a/mpv/.config/mpv/input.conf b/mpv/.config/mpv/input.conf
@@ -0,0 +1,174 @@
+# mpv keybindings
+# Keybindings testing mode: mpv --input-test --force-window --idle
+# the modifiers Shift, Ctrl, Alt and Meta (may not work on the terminal).
+# The default keybindings are hardcoded into the mpv binary.
+# You can disable them completely with: --no-input-default-bindings
+
+l seek 5
+h seek -5
+k seek 60
+j seek 60
+s quit-watch-later
+
+# If this is enabled, treat all the following bindings as default.
+#default-bindings start
+
+#MBTN_LEFT ignore # don't do anything
+#MBTN_LEFT_DBL cycle fullscreen # toggle fullscreen on/off
+#MBTN_RIGHT cycle pause # toggle pause on/off
+#MBTN_BACK playlist-prev
+#MBTN_FORWARD playlist-next
+
+# Mouse wheels, touchpad or other input devices that have axes
+# if the input devices supports precise scrolling it will also scale the
+# numeric value accordingly
+#WHEEL_UP seek 10
+#WHEEL_DOWN seek -10
+#WHEEL_LEFT add volume -2
+#WHEEL_RIGHT add volume 2
+
+## Seek units are in seconds, but note that these are limited by keyframes
+#RIGHT seek 5
+#LEFT seek -5
+#UP seek 60
+#DOWN seek -60
+# Do smaller, always exact (non-keyframe-limited), seeks with shift.
+# Don't show them on the OSD (no-osd).
+#Shift+RIGHT no-osd seek 1 exact
+#Shift+LEFT no-osd seek -1 exact
+#Shift+UP no-osd seek 5 exact
+#Shift+DOWN no-osd seek -5 exact
+# Skip to previous/next subtitle (subject to some restrictions; see manpage)
+#Ctrl+LEFT no-osd sub-seek -1
+#Ctrl+RIGHT no-osd sub-seek 1
+# Adjust timing to previous/next subtitle
+#Ctrl+Shift+LEFT sub-step -1
+#Ctrl+Shift+RIGHT sub-step 1
+# Move video rectangle
+#Alt+left add video-pan-x 0.1
+#Alt+right add video-pan-x -0.1
+#Alt+up add video-pan-y 0.1
+#Alt+down add video-pan-y -0.1
+# Zoom/unzoom video
+#Alt++ add video-zoom 0.1
+#Alt+- add video-zoom -0.1
+# Reset video zoom/pan settings
+#Alt+BS set video-zoom 0 ; set video-pan-x 0 ; set video-pan-y 0
+#PGUP add chapter 1 # skip to next chapter
+#PGDWN add chapter -1 # skip to previous chapter
+#Shift+PGUP seek 600
+#Shift+PGDWN seek -600
+#[ multiply speed 1/1.1 # scale playback speed
+#] multiply speed 1.1
+#{ multiply speed 0.5
+#} multiply speed 2.0
+#BS set speed 1.0 # reset speed to normal
+#Shift+BS revert-seek # undo previous (or marked) seek
+#Shift+Ctrl+BS revert-seek mark # mark position for revert-seek
+#q quit
+#Q quit-watch-later
+#q {encode} quit 4
+#ESC set fullscreen no
+#ESC {encode} quit 4
+#p cycle pause # toggle pause/playback mode
+#. frame-step # advance one frame and pause
+#, frame-back-step # go back by one frame and pause
+#SPACE cycle pause
+#> playlist-next # skip to next file
+#ENTER playlist-next # skip to next file
+#< playlist-prev # skip to previous file
+#O no-osd cycle-values osd-level 3 1 # cycle through OSD mode
+#o show-progress
+#P show-progress
+#i script-binding stats/display-stats
+#I script-binding stats/display-stats-toggle
+#` script-binding console/enable
+#z add sub-delay -0.1 # subtract 100 ms delay from subs
+#Z add sub-delay +0.1 # add
+#x add sub-delay +0.1 # same as previous binding (discouraged)
+#ctrl++ add audio-delay 0.100 # this changes audio/video sync
+#ctrl+- add audio-delay -0.100
+#9 add volume -2
+#/ add volume -2
+#0 add volume 2
+#* add volume 2
+#m cycle mute
+#1 add contrast -1
+#2 add contrast 1
+#3 add brightness -1
+#4 add brightness 1
+#5 add gamma -1
+#6 add gamma 1
+#7 add saturation -1
+#8 add saturation 1
+#Alt+0 set window-scale 0.5
+#Alt+1 set window-scale 1.0
+#Alt+2 set window-scale 2.0
+# toggle deinterlacer (automatically inserts or removes required filter)
+#d cycle deinterlace
+#r add sub-pos -1 # move subtitles up
+#R add sub-pos +1 # down
+#t add sub-pos +1 # same as previous binding (discouraged)
+#v cycle sub-visibility
+# stretch SSA/ASS subtitles with anamorphic videos to match historical
+#V cycle sub-ass-vsfilter-aspect-compat
+# switch between applying no style overrides to SSA/ASS subtitles, and
+# overriding them almost completely with the normal subtitle style
+#u cycle-values sub-ass-override "force" "no"
+#j cycle sub # cycle through subtitles
+#J cycle sub down # ...backwards
+#SHARP cycle audio # switch audio streams
+#_ cycle video
+#T cycle ontop # toggle video window ontop of other windows
+#f cycle fullscreen # toggle fullscreen
+#s screenshot # take a screenshot
+#S screenshot video # ...without subtitles
+#Ctrl+s screenshot window # ...with subtitles and OSD, and scaled
+#Alt+s screenshot each-frame # automatically screenshot every frame
+#w add panscan -0.1 # zoom out with -panscan 0 -fs
+#W add panscan +0.1 # in
+#e add panscan +0.1 # same as previous binding (discouraged)
+# cycle video aspect ratios; "-1" is the container aspect
+#A cycle-values video-aspect-override "16:9" "4:3" "2.35:1" "-1"
+#POWER quit
+#PLAY cycle pause
+#PAUSE cycle pause
+#PLAYPAUSE cycle pause
+#PLAYONLY set pause no
+#PAUSEONLY set pause yes
+#STOP quit
+#FORWARD seek 60
+#REWIND seek -60
+#NEXT playlist-next
+#PREV playlist-prev
+#VOLUME_UP add volume 2
+#VOLUME_DOWN add volume -2
+#MUTE cycle mute
+#CLOSE_WIN quit
+#CLOSE_WIN {encode} quit 4
+#E cycle edition # next edition
+#l ab-loop # Set/clear A-B loop points
+#L cycle-values loop-file "inf" "no" # toggle infinite looping
+#ctrl+c quit 4
+#DEL script-binding osc/visibility # cycle OSC display
+#ctrl+h cycle-values hwdec "auto" "no" # cycle hardware decoding
+#F8 show_text ${playlist} # show playlist
+#F9 show_text ${track-list} # show list of audio/sub streams
+
+#
+# Legacy bindings (may or may not be removed in the future)
+#
+#! add chapter -1 # skip to previous chapter
+#@ add chapter 1 # next
+
+#
+# Not assigned by default
+# (not an exhaustive list of unbound commands)
+#
+
+# ? add sub-scale +0.1 # increase subtitle font size
+# ? add sub-scale -0.1 # decrease subtitle font size
+# ? cycle angle # switch DVD/Bluray angle
+# ? cycle sub-forced-only # toggle DVD forced subs
+# ? cycle program # cycle transport stream programs
+# ? stop # stop playback (quit or enter idle mode)
diff --git a/mpv/.config/mpv/mpv.conf b/mpv/.config/mpv/mpv.conf
@@ -0,0 +1,138 @@
+#
+# Example mpv configuration file
+#
+# Warning:
+#
+# The commented example options usually do _not_ set the default values. Call
+# mpv with --list-options to see the default values for most options. There is
+# no builtin or example mpv.conf with all the defaults.
+#
+#
+# Configuration files are read system-wide from /usr/local/etc/mpv.conf
+# and per-user from ~/.config/mpv/mpv.conf, where per-user settings override
+# system-wide settings, all of which are overridden by the command line.
+#
+# Configuration file settings and the command line options use the same
+# underlying mechanisms. Most options can be put into the configuration file
+# by dropping the preceding '--'. See the man page for a complete list of
+# options.
+#
+# Lines starting with '#' are comments and are ignored.
+#
+# See the CONFIGURATION FILES section in the man page
+# for a detailed description of the syntax.
+#
+# Profiles should be placed at the bottom of the configuration file to ensure
+# that settings wanted as defaults are not restricted to specific profiles.
+
+##################
+# video settings #
+##################
+
+# Start in fullscreen mode by default.
+#fs=yes
+
+# force starting with centered window
+#geometry=50%:50%
+
+# don't allow a new window to have a size larger than 90% of the screen size
+#autofit-larger=90%x90%
+
+# Do not close the window on exit.
+#keep-open=yes
+
+# Do not wait with showing the video window until it has loaded. (This will
+# resize the window once video is loaded. Also always shows a window with
+# audio.)
+#force-window=immediate
+
+# Disable the On Screen Controller (OSC).
+#osc=no
+
+# Keep the player window on top of all other windows.
+#ontop=yes
+
+# Specify high quality video rendering preset (for --vo=gpu only)
+# Can cause performance problems with some drivers and GPUs.
+#profile=gpu-hq
+
+# Force video to lock on the display's refresh rate, and change video and audio
+# speed to some degree to ensure synchronous playback - can cause problems
+# with some drivers and desktop environments.
+#video-sync=display-resample
+
+# Enable hardware decoding if available. Often, this does not work with all
+# video outputs, but should work well with default settings on most systems.
+# If performance or energy usage is an issue, forcing the vdpau or vaapi VOs
+# may or may not help.
+#hwdec=auto
+
+##################
+# audio settings #
+##################
+
+# Specify default audio device. You can list devices with: --audio-device=help
+# The option takes the device string (the stuff between the '...').
+#audio-device=alsa/default
+
+# Do not filter audio to keep pitch when changing playback speed.
+#audio-pitch-correction=no
+
+# Output 5.1 audio natively, and upmix/downmix audio with a different format.
+#audio-channels=5.1
+# Disable any automatic remix, _if_ the audio output accepts the audio format.
+# of the currently played file. See caveats mentioned in the manpage.
+# (The default is "auto-safe", see manpage.)
+#audio-channels=auto
+
+##################
+# other settings #
+##################
+
+# Pretend to be a web browser. Might fix playback with some streaming sites,
+# but also will break with shoutcast streams.
+#user-agent="Mozilla/5.0"
+
+# cache settings
+#
+# Use a large seekable RAM cache even for local input.
+#cache=yes
+#
+# Use extra large RAM cache (needs cache=yes to make it useful).
+#demuxer-max-bytes=500M
+#demuxer-max-back-bytes=100M
+#
+# Disable the behavior that the player will pause if the cache goes below a
+# certain fill size.
+#cache-pause=no
+#
+# Store cache payload on the hard disk instead of in RAM. (This may negatively
+# impact performance unless used for slow input such as network.)
+#cache-dir=~/.cache/
+#cache-on-disk=yes
+
+# Display English subtitles if available.
+#slang=en
+
+# Play Finnish audio if available, fall back to English otherwise.
+#alang=fi,en
+
+# Change subtitle encoding. For Arabic subtitles use 'cp1256'.
+# If the file seems to be valid UTF-8, prefer UTF-8.
+# (You can add '+' in front of the codepage to force it.)
+#sub-codepage=cp1256
+
+# You can also include other configuration files.
+#include=/path/to/the/file/you/want/to/include
+
+############
+# Profiles #
+############
+
+# The options declared as part of profiles override global default settings,
+# but only take effect when the profile is active.
+
+# The following profile can be enabled on the command line with: --profile=eye-cancer
+
+#[eye-cancer]
+#sharpen=5
